Saia Burgess 3-phase energy meter with an integrated Serial RS-485 Modbus interface allows direct reading of all relevant data, such as energy (total and partial), current and voltage for every phase, and active and reactive power for every phase and for the three phases.

• Manufacturer: Saia Burgess
• Product name: Saia Burgess 3-phase electric meter
• Product code: ALE3D5FD10C2A00
• Website: Saia Burgess
• Manual: Saia Burgess manual

Device preparation

Connect the phase meter to power and Modbus RTU. The communication is ready 30 s after the Power On. Refresh Time for the Data is 10s. Therefore the delay between reads of the same Data should be at least 10s.

Configuration

Download the example from our website and import it into your configuration. Step by step instructions on how to import are available in our instructional video.

When the example is added into the Comfortclick project, correct RTU settings need to be set in order to connect to the device (make sure correct COM port is selected). Modbus addresses provided in the example should provide correct information from all three phases of the electric meter. If the device shows different feedback, address numbers can be tweaked according to device's manual. Additional addresses can be added if required.